Blog Posts Tagged Heat Transfer Module
![](http://cdn.comsol.com/wordpress/2014/10/Ride_and_Drive_EVs_Plugn_Drive_Ontario1.jpg)
Designing Electric Vehicles with Magnetic Cooling Technology
Researchers from the National Institute of Applied Science designed a magnetocaloric HVAC system for an electric vehicle using multiphysics simulation. Get the full story >>
![](http://cdn.comsol.com/wordpress/2014/10/TIPS-schematic1.png)
Green Energy Management for Communication Systems
Look inside a team at Bell Labs, the research arm of Alcatel-Lucent committed to designing technologies for significantly improving energy management for next-generation telecom products.
![](http://cdn.comsol.com/wordpress/2014/10/Temperature-and-Flow-in-Li-ion-battery.png)
Accounting for Heat in the Design of Lithium-Ion Batteries
Heat transfer is an important phenomenon to consider when designing a lithium-ion battery. See how multiphysics simulation can help ensure a safe and efficient Li-ion battery design.
![](http://cdn.comsol.com/wordpress/2014/09/heat-exchanger1.jpg)
Improving the Beer Brewing Process with Simulation
Which side of home beer brewing are you more interested in: The culinary side, like the recipes and ingredients, or the engineering one, like the conjugate heat transfer and chemical reactions?
![](http://cdn.comsol.com/wordpress/2014/08/Thermal-contact-resistance.jpg)
Thermal Contact Resistance Simulation
When 2 materials are in direct contact, thermal conductivity is determined by their properties, but surface roughness introduces air-filled gaps between the materials. How do you model this?
![](http://cdn.comsol.com/wordpress/2014/08/Coil-heat-exchange-model.png)
Modeling a Coil Heat Exchanger
Coil heat exchangers are simple and easy to manufacture — but what about modeling them? Adding expressions to compute the temperature drop between coil turns simplifies the modeling process.
![](http://cdn.comsol.com/wordpress/sites/1/2019/05/COMSOL_Blog_OG_Mechanical-245x195.png)
Phase Change: Cooling and Solidification of Metal
Phase change: A transformation of material from one state of matter to another due to a change in temperature. Learn how to model phase change in a continuous casting process.
![](http://cdn.comsol.com/wordpress/2014/07/Ingot-casting.jpg)
Optimizing the Continuous Casting Process with Simulation
To optimize the steelmaking process of continuous casting, researchers at SMS Concast turned to simulation. One result? A steelmaking plant in Taiwan reduced yearly CO2 emissions by ~40,000 tons.