Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Axis formatting

Posted Feb 1, 2016, 4:15 a.m. EST Results & Visualization Version 5.0 3 Replies

Ulugbek Djuraev
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear users, greetings.
I would like to know how to produce graphs, where the both x- and y-axis are numerically consistent. For instance, on y-axis I have the following numbers displayed:
0.18, 0.2, 0.22, 0.24, 0.3 and etc.
Instead, I want them all to be consistent as shown here
0.18, 0.20, 0.22, 0.24, 0.30..

How

Attachments:

3 Replies Last Post Feb 2, 2016, 2:15 a.m. EST
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Feb 1, 2016, 6:12 a.m. EST
In 5.1 and 5.2 you can achieve this as follows:

- Expand the Number Format section in the plot group.

- Enable Manual axis settings.

- Check the Show trailing zeros check box.

- Change the Precision so that you get the right number of significant digits. In your example it is 3.

In 5.1 and 5.2 you can achieve this as follows: - Expand the Number Format section in the plot group. - Enable Manual axis settings. - Check the Show trailing zeros check box. - Change the Precision so that you get the right number of significant digits. In your example it is 3.
Ulugbek Djuraev
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Feb 1, 2016, 8:20 p.m. EST

In 5.1 and 5.2 you can achieve this as follows:

- Expand the Number Format section in the plot group.

- Enable Manual axis settings.

- Check the Show trailing zeros check box.

- Change the Precision so that you get the right number of significant digits. In your example it is 3.


Thank you, Mr Andersson.
Can I format each axis individually though?
[QUOTE] In 5.1 and 5.2 you can achieve this as follows: - Expand the Number Format section in the plot group. - Enable Manual axis settings. - Check the Show trailing zeros check box. - Change the Precision so that you get the right number of significant digits. In your example it is 3. [/QUOTE] Thank you, Mr Andersson. Can I format each axis individually though?
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Feb 2, 2016, 2:15 a.m. EST
Thank you, Mr Andersson.
Can I format each axis individually though?


No, you can't.


[QUOTE]Thank you, Mr Andersson. Can I format each axis individually though?[/QUOTE] No, you can't.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content