Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Porous Media - High Velocity
Posted Feb 17, 2016, 10:18 p.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
Hello
I'm doing a job that compares a 3D model with a 2D planning.
This 2D model is a ".dxf" file.
I was unable to remove the pores as if they were empty, but as obstacles.
I simulating the flow of a porous medium model by creeping flow method and steady state.
My input parameter is pressure.
When simulate the 3D model with values consistent with the experimental.
When simulate, with the same parameters, the 2D model, the input speed and output is 100 times greater than would result.
My solvers are Pardiso and Double Dogleg.
What I doing wrong?
Thank you
I'm doing a job that compares a 3D model with a 2D planning.
This 2D model is a ".dxf" file.
I was unable to remove the pores as if they were empty, but as obstacles.
I simulating the flow of a porous medium model by creeping flow method and steady state.
My input parameter is pressure.
When simulate the 3D model with values consistent with the experimental.
When simulate, with the same parameters, the 2D model, the input speed and output is 100 times greater than would result.
My solvers are Pardiso and Double Dogleg.
What I doing wrong?
Thank you
Attachments:
1 Reply Last Post Feb 22, 2016, 6:14 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi Erick,
Our support team will be happy to help you if the license you are using is on subscription.
Kind Regards,
--
Luís Eraldo Cassias Pereira
COMSOL Ltda.
Engenheiro de Aplicação e Vendas
Our support team will be happy to help you if the license you are using is on subscription.
Kind Regards,
--
Luís Eraldo Cassias Pereira
COMSOL Ltda.
Engenheiro de Aplicação e Vendas