Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
some issues on the paper 'Numerical Simulation of Oil Recovery by Polymer Injection using COMSOL' (Revised)
Posted Mar 7, 2016, 3:51 a.m. EST Porous Media Flow Version 5.2 0 Replies
Please login with a confirmed email address before reporting spam
In this paper, the transport of polymer and salt species is simulated in the Module 'Transport of diluted species in porous media' . In this module, symbol εp denotes porosity, but the mathematical model indicates it should be 'Φ(porosity)×Sa(saturation of aqueous phase)'.
Here, I attach two images of the aqueous phase saturation (Sa). From the graphs, after 350d, Sa will exceed 1, which is not consistant with the changing law of saturation. While Cs (concentration of salt) comlpies with the paper.
Does anybody else has met this situation? If you do, please contact me or share some ideas with me.
Sincerely
Shirley
Mar.10, 2016
Attachments:
Hello Shirley Long
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.