Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modeling sphincter

Posted Oct 27, 2010, 6:18 p.m. EDT 0 Replies

Grant Ericson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!

My name is Grant and I am curious to know if COMSOL can model something similar to a sphincter. This would be, in essence--and quite crudely put, a plate with a hole that varies in diameter through which fluid flows.

I know that COMSOL can handle moving domains such as a particle in free-fall, but this problem represents a geometry deforming in a user-defined way (not due to fluid forces). Would a parametric sweep be able to compensate for such geometric changes?

Any help is greatly appreciated.

Sincerely,
Grant


0 Replies Last Post Oct 27, 2010, 6:18 p.m. EDT
COMSOL Moderator

Hello Grant Ericson

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content