Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Solution Repeatability
Posted Oct 29, 2010, 9:28 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I'm running an eigenfrequency analysis with a plane stress model. The modal frequencies seem to vary somewhat wildly every time I run the solver (changing neither the model nor any parameters between runs). Is there any way to assure more repeatable solutions. I am more interested in repeatability than accuracy.
Thanks!
I'm running an eigenfrequency analysis with a plane stress model. The modal frequencies seem to vary somewhat wildly every time I run the solver (changing neither the model nor any parameters between runs). Is there any way to assure more repeatable solutions. I am more interested in repeatability than accuracy.
Thanks!
1 Reply Last Post Oct 30, 2010, 1:57 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Some solver settings are designed for iterative solving resuming calculation and so forth ,,..
"lack of repeatibility" is a feature then..
for example check the initial solurtion in the solver settings if it is set for previous solution [anything but expression] then you will get a different case every time you run the solver without changing anything... there might be other settings that create the same effect.. read carefully the solver section of the doc and make sure you understand every single setting there [ even the default one]
JF
"lack of repeatibility" is a feature then..
for example check the initial solurtion in the solver settings if it is set for previous solution [anything but expression] then you will get a different case every time you run the solver without changing anything... there might be other settings that create the same effect.. read carefully the solver section of the doc and make sure you understand every single setting there [ even the default one]
JF