Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
comsol ode+application modes
Posted Nov 3, 2010, 5:01 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
I need to model pressure acoustic with this differential equation:
a*r*rtt+1.5*r*(rt)^2=p0 a=density of fluid, p0=pressure distribution resulted from solving of pressure acoustic in the domain
1- How can I solve this problem? In "Global equation” I couldn’t insert the results from other application modes.
2- I also try to solve my problem in PDE, General, Time dependent analysis (combined with my first acoustic application mode)
?=0,0 F=p ( resulted from acoustic pressure) ea=1000 da=1500
in boundary condition (R=-r which means that in all the boundaries r=0)
I need comsol to solve my acoustic pressure then use this pressure distribution and then solve my PDE. How can i manage this? I solve pressure acoustic with time harmonic (choose in "solve for” tab (in "solver manager" ) just p ) and then choose "time dependent solver" and then in "solve for" choose "pde" but i couldn't get my results.
Can I use two different solvers (like what I choose, time harmonic and time dependent) in one model with two application modes?
Any answers would be greatly appreciated
Regards,
Fatemeh Sharifi
Hello Fatemeh Sharifi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.