Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Variable HTC (i.e. function) over the position of a boundary condition

Posted Apr 7, 2016, 10:45 a.m. EDT Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 0 Replies

Bart Vervaet
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I'm using the heat transfer module (2D, stationary) to model the cooling of a moving material. In stead of using an average HTC along a certain length of the material (heat flux boundary condition) I want to define a variable HTC (i.e. with a function) over this cooling length/position.

Thanks a lot,

Bart
0 Replies Last Post Apr 7, 2016, 10:45 a.m. EDT
COMSOL Moderator

Hello Bart Vervaet

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content