Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

mesh file(.mphtxt) imported

Posted Nov 18, 2010, 10:57 p.m. EST 1 Reply

Ying Peng
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have a question about meshing.

I have imported a mesh file which includes a volume mesh.

Can I select the "nodes" or "element" of the mesh like what we do in ANSYS.

For example, in ansys, we could assign a point load to a "node" . Can we do that in Comsol and how?

Thanks~

1 Reply Last Post Nov 20, 2010, 8:17 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 20, 2010, 8:17 a.m. EST
Hi

No not in Comsol, because its not the mesh that is important its the geometrical domain and boundary entities, where physics and BC are applied (not onto the mesh).

See the other threads on this topic

--
Good luck
Ivar
Hi No not in Comsol, because its not the mesh that is important its the geometrical domain and boundary entities, where physics and BC are applied (not onto the mesh). See the other threads on this topic -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content