Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Piezoelectric Simulation Without MEMS Module

Posted May 31, 2016, 12:30 p.m. EDT Version 5.1 1 Reply

Jason Lee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is it possible to simulate piezoelectric materials without the MEMs Module and just the piezoelectric material option under structural mechanics?

I have done some basic simulations of cantilevers and beams but not piezoelectric. Any insights will be helpful.
1 Reply Last Post May 31, 2016, 3:46 p.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago May 31, 2016, 3:46 p.m. EDT
Hello Jason,
There are capabilities for piezoelectric modeling in the MEMS Module, the Structural Mechanics Module and the Acoustics Module. Some of those capabilities are in common to all three, others are unique to the MEMS Module.
You can compare those capabilities in the Specification Chart ( www.comsol.com/products/specifications/ ) by searching for "piezo".
Best regards,
Jeff
Hello Jason, There are capabilities for piezoelectric modeling in the MEMS Module, the Structural Mechanics Module and the Acoustics Module. Some of those capabilities are in common to all three, others are unique to the MEMS Module. You can compare those capabilities in the Specification Chart ( https://www.comsol.com/products/specifications/ ) by searching for "piezo". Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content