Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Couple ring resonators
Posted Jun 3, 2016, 2:09 p.m. EDT Version 5.1, Version 5.2 0 Replies
Please login with a confirmed email address before reporting spam
I faced a problem with selecting the right structure for my simulation. My aim is to simulate coupled ring resonators. I have previously used the axisymmetric approach for simulating a single ring resonator however now that I have two rings(or more) I can't use the axisymmetric. I also looked in to the noch filter example, and although it is very useful but still I believe beam envelope cant be useful in my case (since I need to perform the mode analysis, there will be no bus waveguide and input). I need to be able to calculate the effective index of refraction for the coupled ring structure and I want to avoid the 3d modeling. I tried the top view 2d simulation but the results are not correct.
Hello Ni Dave
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.