Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
singularity problem in 3d cylinder
Posted Jun 10, 2016, 12:42 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
hi I m supposed to simulate two-phase laminar flow problem (moving mesh).
the size of a cyl is ,
r=5 h=5
The bottom of the cylinder is fixed and the top of the cylinder is moving with a certain speed in normal direction.
the side face of the cyl. is exposed to the air.
geometry
cyl : r=5 h=5
physics
wall at h=0 : no silp and predescribed mesh velocity =0
wall at h=5 : moving wall u=0.01 m/s and predescribed mesh velocity=0.01m/s
external fluid interface
remeshing fulfilled for initial time. or last time step of newton method is not converged.
singularity problem..etc
Hello Seung Hui Kim
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.