Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
calculate the conductivity on comsol
Posted Jun 12, 2016, 2:35 p.m. EDT Low-Frequency Electromagnetics, Geometry, Materials, Parameters, Variables, & Functions, Studies & Solvers Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi
i have geometry which has two different material . i would like to calculate the conductivity for all geometry after excitation by using comsol
how can i do that
thank you
i have geometry which has two different material . i would like to calculate the conductivity for all geometry after excitation by using comsol
how can i do that
thank you
1 Reply Last Post Jul 6, 2016, 4:06 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hello Ali,
I assume you mean the DC conductance (the inverse of the resistance) of the structure. If so, you can apply a voltage drop across the device and measure the total current flowing through, or conversely impose a total current and measure the voltage drop. Then Ohm's law is your friend.
Depending on what modules are on your license, you can use Terminal boundary conditions instead to have the software compute the resistance/conductance automatically for you.
Best,
Jeff
I assume you mean the DC conductance (the inverse of the resistance) of the structure. If so, you can apply a voltage drop across the device and measure the total current flowing through, or conversely impose a total current and measure the voltage drop. Then Ohm's law is your friend.
Depending on what modules are on your license, you can use Terminal boundary conditions instead to have the software compute the resistance/conductance automatically for you.
Best,
Jeff