Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Accessing results while solving problem

Posted Dec 1, 2010, 7:15 p.m. EST 1 Reply

Ivan Gruber
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have a transient problem where I implemented a scalar variable f(t). Since f(t) is dependent on f(t-1), I need to access the result during solution. How can I access this variable during the solution process?
Thanks in advance

Best
Ivan
1 Reply Last Post Dec 2, 2010, 1:21 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 2, 2010, 1:21 a.m. EST
Hi

check the Forum (tra a serch) there are several discussion on accessing (or npt) last timesteps, you have also the at() and with() operators, but I sue them in the postprocessing. I believe there is even more on the knowledgebase of COMSOL, try a search there too

--
Good luck
Ivar
Hi check the Forum (tra a serch) there are several discussion on accessing (or npt) last timesteps, you have also the at() and with() operators, but I sue them in the postprocessing. I believe there is even more on the knowledgebase of COMSOL, try a search there too -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content