Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

multiple elecromagnetic heat source issue

Posted Jul 20, 2016, 4:34 p.m. EDT 0 Replies

Lei Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear Users

Now I have deposited a thin film on top of a SiN waveguide and I applied two optical pulses with different wavelengths into this SiN waveguide and I want to model model temperature effect inside the material influenced by the two pulses. Based on the dielectric waveguide module, it seems that I need to add two port boundary conditions for the two pulse. However, I am not sure how I can introduce electromagnetic heat source into the simulation Do I also need to introduce two electromagnetic heat source into the simulation? Many thanks.

best regards
Lei
0 Replies Last Post Jul 20, 2016, 4:34 p.m. EDT
COMSOL Moderator

Hello Lei Wang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content