Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Computer configuration for COMSOL

Posted Sep 7, 2016, 10:19 a.m. EDT Interfacing Version 5.2a 2 Replies

Mi Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Now my computer running COMSOL will show the disk is not enough, want to buy a good point of the computer to run COMSOL, we have not recommended? Now I don't know the computer configuration. What is the relationship between computer configuration and mesh, degrees of freedom and so on?
2 Replies Last Post Sep 7, 2016, 9:03 p.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Sep 7, 2016, 11:11 a.m. EDT
For a primer on the factors that influence how much memory it takes to solve various types of models, see this link: www.comsol.com/blogs/much-memory-needed-solve-large-comsol-models/

Short of buying a new computer, you will find some advice on various techniques that will reduce memory usage here: www.comsol.com/support/knowledgebase/1030/

If you should consider buying a computer, for hardware recommendations, see this link: www.comsol.com/support/knowledgebase/866/

Best regards,
Jeff
For a primer on the factors that influence how much memory it takes to solve various types of models, see this link: https://www.comsol.com/blogs/much-memory-needed-solve-large-comsol-models/ Short of buying a new computer, you will find some advice on various techniques that will reduce memory usage here: https://www.comsol.com/support/knowledgebase/1030/ If you should consider buying a computer, for hardware recommendations, see this link: https://www.comsol.com/support/knowledgebase/866/ Best regards, Jeff
Mi Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Sep 7, 2016, 9:03 p.m. EDT
Thank you, Thank you very much!
Thank you, Thank you very much!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content