Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Flux Discontinuity at Geometric Partition

Posted Sep 9, 2016, 6:20 p.m. EDT Heat Transfer & Phase Change, Geometry, Mesh Version 4.4 0 Replies

Bryan Burk
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,
I have a heated channel with fluid flowing through it which I partitioned using work planes in several different locations for meshing and other purposes. When the model solves, it has discontinuities in the heat flux at these partitions. It's not a big deal for my model, but it really should be continuous. Is there a way to force this to be the case?

Thank you,
Bryan
0 Replies Last Post Sep 9, 2016, 6:20 p.m. EDT
COMSOL Moderator

Hello Bryan Burk

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content