Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulation of welding
Posted Sep 14, 2016, 2:39 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I'm new here. I'm sorry for my english.
I'm ending my school I have to write thesis. Thopic of my work is Analysis of the distribution of heat during welding.I am researching steel using thermal imaging and then check my result in COMSOL.
I read topic about
I'm writing to you because I have problem. I want to simulate arc welding where heat source is moving. It's not have to be circle. I need simulate welding in straight line.
I have two problems:
1) Lap joint
2) T-joint
Can you help me?
Thank you.
I'm new here. I'm sorry for my english.
I'm ending my school I have to write thesis. Thopic of my work is Analysis of the distribution of heat during welding.I am researching steel using thermal imaging and then check my result in COMSOL.
I read topic about
I'm writing to you because I have problem. I want to simulate arc welding where heat source is moving. It's not have to be circle. I need simulate welding in straight line.
I have two problems:
1) Lap joint
2) T-joint
Can you help me?
Thank you.
1 Reply Last Post Sep 15, 2016, 1:27 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hi,
You can find some suggestions about how to move your heat source in this blog post:
www.comsol.com/blogs/how-to-make-boundary-conditions-conditional-in-your-simulation/
There are of course many other aspects of welding simulation, depending on the purpose. If you make a search for "welding" on our website, you will get a number of hits.
Regards,
Henrik
You can find some suggestions about how to move your heat source in this blog post:
www.comsol.com/blogs/how-to-make-boundary-conditions-conditional-in-your-simulation/
There are of course many other aspects of welding simulation, depending on the purpose. If you make a search for "welding" on our website, you will get a number of hits.
Regards,
Henrik