Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Frequency domain analysis
Posted Sep 20, 2016, 5:56 p.m. EDT Battery Design, Chemical Reaction Engineering, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to perform an EIS with a 2d-axial revolution model. The model is composed of TCS-FP and second current distribution but when I try to activate the FP and TCS in the Frequency solver an orange triangle appears (perturbation in frequency domain).
I set one BC with Voltage (1 [V] ) and the other is set to 0[V] (ground). The voltage is harmonic with 5e-3[V] of amplitude but with the boundary probe I read only a const. value of the voltage=5e-3[V]. Why?
Another problem arise from the value of density of the mixtrures which changes and assume the value of the component with the higher mass fraction.
Thanks in advance to all.
Hello Daniel Mae
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.