Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
rolling sliding contact
Posted Sep 26, 2016, 9:41 a.m. EDT MEMS & Piezoelectric Devices, Structural Mechanics Version 5.2a 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
I would like to create a model in time dependent study. My model include a cantilever beam and a ball with no contact in initial moment. A ball located in the tip of the beam, it was applied a harmonic displacement and then it is going to approaching and contact of the tip of the cantilever beam. So, in this case how could I define the contact boundary condition of the cantilever beam and the ball.
Thanks
I would like to create a model in time dependent study. My model include a cantilever beam and a ball with no contact in initial moment. A ball located in the tip of the beam, it was applied a harmonic displacement and then it is going to approaching and contact of the tip of the cantilever beam. So, in this case how could I define the contact boundary condition of the cantilever beam and the ball.
Thanks
2 Replies Last Post Sep 29, 2016, 9:17 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Dear Thien,
Maybe the following model can help you : www.comsol.com/model/adhesion-and-decohesion-of-indenting-ball-42421. It describes the way to use an adhesion condition between a ball and a membrane.
Maybe the following model can help you : www.comsol.com/model/adhesion-and-decohesion-of-indenting-ball-42421. It describes the way to use an adhesion condition between a ball and a membrane.
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Thanks for your information