Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to model fluid flow trough perforated wall

Posted Oct 10, 2016, 4:28 p.m. EDT Computational Fluid Dynamics (CFD) Version 4.3a 1 Reply

Daniel Chavez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm trying to model fluid flow trough a perforated tube, but I'm having trouble, the simulation doesn't run. It seems that the fluid does not recognize the hole pattern. I'll appreciate any advice. Thanks
1 Reply Last Post Oct 11, 2016, 2:02 a.m. EDT
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Oct 11, 2016, 2:02 a.m. EDT
Please explain more details:

Have you drawn the holes in the tube or are using mass transport in porous media?

Are the tube holes part of the simulation domain?

What kind of boundary conditions are used on the tube wall?

BR
Lasse

Please explain more details: Have you drawn the holes in the tube or are using mass transport in porous media? Are the tube holes part of the simulation domain? What kind of boundary conditions are used on the tube wall? BR Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content