Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Warning - "Output object is empty"

Posted Oct 31, 2016, 5:59 a.m. EDT Geometry Version 5.2a 1 Reply

Ekaterina Kolchanova
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm trying to difference between object - cyl1 (objects to add) and another objects - cyl2 and several import objects (objects to subtract) in a large model. But in the result I keep getting a warning that says, "output object is empty".

Any help or tips would be much appreciated.
1 Reply Last Post Nov 7, 2016, 8:03 a.m. EST
René Christensen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Nov 7, 2016, 8:03 a.m. EST
It could be that the error message gives you exactly what's wrong, namely that after the operation, there is nothing left (meaning that the total of the domains to be subtracted cover cyl1). But try doing simpler operations e.g. with each of the subtract-domains at a time, and see if one of them creates the problem.
It could be that the error message gives you exactly what's wrong, namely that after the operation, there is nothing left (meaning that the total of the domains to be subtracted cover cyl1). But try doing simpler operations e.g. with each of the subtract-domains at a time, and see if one of them creates the problem.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content