Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to calculate radiated power of a patch antenna?

Posted Nov 4, 2016, 3:46 a.m. EDT Version 4.4 0 Replies

Theerawat Sansook
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

I am working on a project in which i have chosen Electromagnetic frequency domain field, i constructed a model of mobile phone patch antenna. I choose the lumped port boundary condition and set the Voltage = 45.5 and the Z(ref) = 75(ohm). I am following a paper in which i have to set the radiated power 1W, how can i set it in lumped port condition? i have seen the port boundary condition, i can set the power in that, but how to set it in the lumped port Bc.

Thanks in advance.
0 Replies Last Post Nov 4, 2016, 3:46 a.m. EDT
COMSOL Moderator

Hello Theerawat Sansook

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content