Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Nonlinear anisotropic magnetic material-AC/DC module
Posted Nov 17, 2016, 7:27 p.m. EST Low-Frequency Electromagnetics 0 Replies
Please login with a confirmed email address before reporting spam
In the AC/DC module, Is there a way to set a material's magnetic permeability to be non-linear and an-isotropic at the same time?
I know we can do this separately: setting non-linearity by the BH curve and setting the an-isotropic permeability by selecting an-isotropic material by choosing physics constitution->relative permeability->user defined-> an-isotropic.
However what I have is for my material is different non-linear BH curves in different directions such that I have Hx = fx(Bx), Hy = fy(By). Is there a way to build the non-linearity and an-isotropic into the material into comsol at the same time ?
Many thanks
Ning
Hello Ning Zhang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.