Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to add pressure on a silicon disc.
Posted Dec 21, 2016, 7:18 a.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
Hello i am newbie on Comsol,
My problem is i want to add for example 20e3 Pa to a silicon disc
i watch some videos tried some solutions but i still did not get anything.
can someone help me please?
My problem is i want to add for example 20e3 Pa to a silicon disc
i watch some videos tried some solutions but i still did not get anything.
can someone help me please?
1 Reply Last Post Jan 3, 2017, 8:45 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hello Murat,
To get a thorough introduction on how to set up a model in the COMSOL graphical user interface, I would recommend you read and work through the tutorials in the COMSOL Multiphysics Introduction manual. All manuals can be reached in the software through File > Help > Documentation. You can also find that particular manual at this link: cdn.comsol.com/documentation/5.2.1.262/IntroductionToCOMSOLMultiphysics.pdf
I would also recommend this video:
www.comsol.com/video/how-set-up-run-simulation-comsol-multiphysics
Best regards,
Jeff
To get a thorough introduction on how to set up a model in the COMSOL graphical user interface, I would recommend you read and work through the tutorials in the COMSOL Multiphysics Introduction manual. All manuals can be reached in the software through File > Help > Documentation. You can also find that particular manual at this link: cdn.comsol.com/documentation/5.2.1.262/IntroductionToCOMSOLMultiphysics.pdf
I would also recommend this video:
www.comsol.com/video/how-set-up-run-simulation-comsol-multiphysics
Best regards,
Jeff