Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Error while calculating Electric Field
Posted Jan 27, 2017, 5:35 a.m. EST Low-Frequency Electromagnetics Version 5.2 0 Replies
Please login with a confirmed email address before reporting spam
Please help me regarding electric field calculation (es.normE).
I have two comsol models with triangular tip height of 1micrometer and 7micrometer (as i have attached both files).
Note: Slope of both triangular tip is same.
Potential of 5V is applied on boundaries 6,7 and 11. Boundary 2 is grounded.
While calculating field (es.normE), it shows more magnitude at every point in 1micrometer as compared to 7micrometer. Please suggest me the reason behind it, if it is so.
As per my concern, logically, electric field should be more in 7micron model than 1 micron.
Attachments:
Hello Asha Sharma
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.