Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
CPU Clock Usage
Posted Feb 9, 2017, 8:08 a.m. EST Battery Design, Studies & Solvers Version 5.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
Me and my mentor are using an Intel Xeon e5 v4 processor with 3.70 Ghz maximum frequency on Windows 10.
We are solving battery problem with heat transfer coupling.
As we noticed, while the simulation is going on, the CPU clock is fluctuating and barely hits up to 3.7 Ghz. It stayls mostly around 2.7 Ghz.
Is there any way to use the CPU at the maximum clock speed?
Thanks
Erdem
Me and my mentor are using an Intel Xeon e5 v4 processor with 3.70 Ghz maximum frequency on Windows 10.
We are solving battery problem with heat transfer coupling.
As we noticed, while the simulation is going on, the CPU clock is fluctuating and barely hits up to 3.7 Ghz. It stayls mostly around 2.7 Ghz.
Is there any way to use the CPU at the maximum clock speed?
Thanks
Erdem
1 Reply Last Post Feb 10, 2017, 9:06 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Dear Erdem,
Do you have Hyperthreading activated?
There is a very good Knowledge Base entry about this topic: www.comsol.de/support/knowledgebase/1096/,/
You need to log in onto your COMSOL access account to view this entry.
I hope this helps you further.
Do not hesitate to contact the COMSOL technical support.
Best regards,
Gilles
Do you have Hyperthreading activated?
There is a very good Knowledge Base entry about this topic: www.comsol.de/support/knowledgebase/1096/,/
You need to log in onto your COMSOL access account to view this entry.
I hope this helps you further.
Do not hesitate to contact the COMSOL technical support.
Best regards,
Gilles