Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Two port excitation in wave guides

Posted Feb 19, 2017, 10:56 a.m. EST Version 5.2a 2 Replies

Eyal Terkieltaub
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

HI,
I have two parallel waveguides and I am trying to assign each of them a different port.
The idea is to have different phases in each waveguide in every computation.
How can I do that?
2 Replies Last Post Feb 19, 2017, 3:37 p.m. EST
Dave Greve Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Feb 19, 2017, 1:20 p.m. EST
Under Port properties, immediately underneath the Port input power box you will find a box for Port phase.

DW Greve
DWGreve Consulting
Under Port properties, immediately underneath the Port input power box you will find a box for Port phase. DW Greve DWGreve Consulting
Eyal Terkieltaub Lee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Feb 19, 2017, 3:37 p.m. EST
Thank you for the quick answer.
I tried that, while assigning one port to each waveguide (every waveguide got its own port) and one output port for both waveguides, and got this message when computing.
What am I doing wrong?
Thank you for the quick answer. I tried that, while assigning one port to each waveguide (every waveguide got its own port) and one output port for both waveguides, and got this message when computing. What am I doing wrong?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content