Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol stops responding

Posted Apr 24, 2017, 3:16 a.m. EDT 4 Replies

Harish Puppala
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all, whenever I run a simulation that requires long processing time ( particularly in case of parametric sweep), I find that the program stops responding. Neither the results are updating nor I could terminate the simulation. What could be the possible reason?
4 Replies Last Post Apr 26, 2017, 3:57 a.m. EDT
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Apr 24, 2017, 3:49 a.m. EDT
Hi,

myself and others are observing this phenomenon. Look here for a few option to reduce the frequency:
www.comsol.de/community/forums/general/thread/105901

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, myself and others are observing this phenomenon. Look here for a few option to reduce the frequency: https://www.comsol.de/community/forums/general/thread/105901 Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Harish Puppala
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Apr 24, 2017, 8:33 a.m. EDT
Yeah sir, When I encountered this problem, I have gone through your suggestions. But still facing the same problem for the past 10 simulations. Can I overcome this if I switch to earlier versions of comsol (4.4, 4.3 b).
Yeah sir, When I encountered this problem, I have gone through your suggestions. But still facing the same problem for the past 10 simulations. Can I overcome this if I switch to earlier versions of comsol (4.4, 4.3 b).
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Apr 24, 2017, 9:27 a.m. EDT

I haven't observed this in the 4.x versions. But that is not a guarantee. The issue might also result from some interaction with newer driver or windows components. Try it!

I am wondering if this behavior is observed under Linux? Any comments anybody? Any comments from Comsol?

If Linux was not affected it would indeed be a good reason to make a change.

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
I haven't observed this in the 4.x versions. But that is not a guarantee. The issue might also result from some interaction with newer driver or windows components. Try it! I am wondering if this behavior is observed under Linux? Any comments anybody? Any comments from Comsol? If Linux was not affected it would indeed be a good reason to make a change. -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Hanna Gothäll COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Apr 26, 2017, 3:57 a.m. EDT

I am wondering if this behavior is observed under Linux? Any comments anybody? Any comments from Comsol?


This is a known issue in COMSOL Multiphysics 5.2a and it has been observed on all platforms. The issue arises occasionally when plotting while running the solver (including convergence plots, probe plots, and regular plot groups). The issue is fixed in COMSOL Multiphysics 5.3, available for download here:

www.comsol.com/product-download

If you can't update right now, it is recommended to turn off all plotting while running critical computations.
[QUOTE] I am wondering if this behavior is observed under Linux? Any comments anybody? Any comments from Comsol? [/QUOTE] This is a known issue in COMSOL Multiphysics 5.2a and it has been observed on all platforms. The issue arises occasionally when plotting while running the solver (including convergence plots, probe plots, and regular plot groups). The issue is fixed in COMSOL Multiphysics 5.3, available for download here: https://www.comsol.com/product-download If you can't update right now, it is recommended to turn off all plotting while running critical computations.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content