Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Diffusion and absorption simulation

Posted May 8, 2017, 3:37 a.m. EDT 3 Replies

Jens Kanje Nordberg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello

I want to calculate the rate of absorption and diffusion of water from humid air into a solid material. However, I can only find information in COMSOL about diffusion spreading inside one material.

Can I model absorption and diffusion from a gas into a solid?

Thanks for any help
3 Replies Last Post May 9, 2017, 1:54 a.m. EDT
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago May 8, 2017, 8:28 a.m. EDT
Hi

Please check the tutorial of the reverse process, evaporation from porous material. It gives the appropriate boundary conditions etc.

Lasse
Hi Please check the tutorial of the reverse process, evaporation from porous material. It gives the appropriate boundary conditions etc. Lasse
Jens Kanje Nordberg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago May 8, 2017, 9:08 a.m. EDT
Thank you Lasse. Do you have any recommendations for which module/modules to run? I have been looking at Transport of Diluted Species and Species Transport in Porous Media.
Thank you Lasse. Do you have any recommendations for which module/modules to run? I have been looking at Transport of Diluted Species and Species Transport in Porous Media.
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago May 9, 2017, 1:54 a.m. EDT
Hi

These are from the application library, under Heat transfer.

cheers
Lasse
Hi These are from the application library, under Heat transfer. cheers Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content