Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Embedding Beam Inside Solid in Comsol

Posted Jun 5, 2017, 9:05 a.m. EDT Version 5.2a 0 Replies

Suraj Kumar Rana Bhat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I was trying to model a wall with door opening. In the Lintel level I would like to model a Beam, embeded inside the solid, such that Beam conceal inside the wall.

The problem I encountered is, I can see the stress pattern in wall, but in Beam there is no any forces. Seems like there is no connection between beam and solid wall.

I went through these process stated in this link, www.comsol.com/blogs/coupling-structural-mechanics-interfaces/ But couldn't get the result,

I hope someone could help me

Regards
0 Replies Last Post Jun 5, 2017, 9:05 a.m. EDT
COMSOL Moderator

Hello Suraj Kumar Rana Bhat

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content