Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

microreactor

Posted Mar 1, 2011, 9:23 a.m. EST Version 4.1 2 Replies

Fatemeh Zarei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello every body

I am trying to make a microreactor with inlet and outlet but I have problem to make hole on the wall of reactor.
please tell me, how can I make hole on the wall?

Thanks
2 Replies Last Post Mar 1, 2011, 10:20 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 1, 2011, 9:41 a.m. EST
Hi

like that I would say draw a circle on the boundary and define it with an outflow/outlet boundary condition, whatever fits your modeling physics

--
Good luck
Ivar
Hi like that I would say draw a circle on the boundary and define it with an outflow/outlet boundary condition, whatever fits your modeling physics -- Good luck Ivar
Fatemeh Zarei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 1, 2011, 10:20 a.m. EST
Thank you, It seems it is work.
Thank you, It seems it is work.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content