Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Multicomponent Diffusion with Reactions

Posted Jul 15, 2017, 9:13 p.m. EDT 3 Replies

Rohit Goswami
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi.
I'm attempting to simulate a perfume diffusion experiment, however there are several complications.

I assume I'll need a fine to coarse mesh from the source to the surroundings and determine a headspace cutoff for the mesh..
I need advice on how to incorporate the reactions into my PDE...
Any suggestions would be appreciated.
3 Replies Last Post Jul 17, 2017, 4:18 a.m. EDT
Saurabh Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Jul 16, 2017, 2:35 p.m. EDT
Look at this example...
www.youtube.com/watch?v=trcIxmNWJwY
Look at this example... https://www.youtube.com/watch?v=trcIxmNWJwY
Saurabh Sharma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Jul 16, 2017, 2:36 p.m. EDT
Updated: 7 years ago Jul 17, 2017, 1:59 a.m. EDT
Look at the application library for few examples of diffusion and reaction.

Best
Saurabh
Look at the application library for few examples of diffusion and reaction. Best Saurabh
Rohit Goswami
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Jul 17, 2017, 4:18 a.m. EDT
Thanks so much :)
Thanks so much :)

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content