Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Joule heating simulation including the effect of structure geometry
Posted Mar 9, 2011, 8:20 a.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
Hi everyone
I would like to simulation the Joule heating of a micro polysilicon beam that has some sudden change in the geometry along the beam, such as a bottle neck, or a hole, ..etc.
The practical observation shows that the "concentration" of high temperature at these regions (at bottle neck, or places where there are sudden changes in geometry)
However, the simulation does not show that. COMSOL does not take into account the geometry effects? Or there is a certain way to get it done?
Could anyone help me please?
Thanks,
Bao Ta
I would like to simulation the Joule heating of a micro polysilicon beam that has some sudden change in the geometry along the beam, such as a bottle neck, or a hole, ..etc.
The practical observation shows that the "concentration" of high temperature at these regions (at bottle neck, or places where there are sudden changes in geometry)
However, the simulation does not show that. COMSOL does not take into account the geometry effects? Or there is a certain way to get it done?
Could anyone help me please?
Thanks,
Bao Ta
1 Reply Last Post Mar 9, 2011, 11:09 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
check the examples and the video on the main site there is an example on that somewhere (used for the v4 publicity)
--
Good luck
Ivar
check the examples and the video on the main site there is an example on that somewhere (used for the v4 publicity)
--
Good luck
Ivar