Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

time-varying current in model

Posted Nov 6, 2009, 8:51 a.m. EST 1 Reply

Daniel Harburg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I am trying to send a time-varying current through a component i built in COMSOL. Does anyone know how to do this? I cannot use the time-harmonics case because the current should decay with time.
Thanks,
Dan
1 Reply Last Post Nov 7, 2009, 10:44 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Nov 7, 2009, 10:44 a.m. EST
Hi

If you are doing time depending solving, the variable "t" is defined, so isn't this "just" defining your specific variable(s) as function of "t".

An example of a step

voltage = V0*(t<1)+V1*flc2hs(t-1,0.1)

Or have I missed a point in your question ?

Good luck
Ivar
Hi If you are doing time depending solving, the variable "t" is defined, so isn't this "just" defining your specific variable(s) as function of "t". An example of a step voltage = V0*(t

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content