Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Example for specifying a Piezo-Material

Posted Mar 10, 2011, 3:14 a.m. EST MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Materials, Parameters, Variables, & Functions, Structural Mechanics Version 4.1 0 Replies

Andreas Schramm
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am very new to COMSOL and Piezoelectric devices. So I want to ask if there exists an example of how to specify a piezo material in COMSOL. I want to simulate an actor with PIC255 for example. I am using the datasheet under www.piceramic.com/datasheet/Datasheet_piezo_ceramic_materials_PI_Ceramic.pdf but I don`t have a clue how to set the parameters in COMSOL. At least COMSOL expects an 3x6 matrix but in the help the ordering for a 1x6 matrix is given?

Thank you in advance.
0 Replies Last Post Mar 10, 2011, 3:14 a.m. EST
COMSOL Moderator

Hello Andreas Schramm

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content