Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electro-osmosis flow does't re
Posted Aug 17, 2017, 1:26 a.m. EDT Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I am doing simulate Electro-osmosis flow in COMSOL 4.3b, with Electrical Current, and Laminar Flow modules
BCs for Electrical current like:
Electrode: V0+sig_m*Z_DL*conj(Vy) with Z_DL = 1/(i*omega*C_DL), C_DL = eps_m*eplison0_const/lamdaD, lamdaD = 25[nm]
Symmetry boundary: 0
Other: Zero Charge
BCs for fluid:
Electroosmosis Velocity on Electrode
Open Boundary for Top boundary
Other: No slip
I am using Time Dependent study for both ( according to my attached file )
But actually, when I change frequency 30[MHz], the flow doesn't reverse.
Does anyone who familiar with EOF in COMSOL plz help me ?
Best regards
Attachments:
Hello NDN
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.