Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
what can be the effect of changing the dimension ?
Posted Aug 18, 2017, 6:29 a.m. EDT Geometry, Results & Visualization Version 4.3, Version 4.3a, Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I am simulating the variation of humidity in several connected boxes, in 1D, 2D and 3D geometry. I found that the maximum value of relative humidity is dropping so it goes from 140% for 1D to 120% for 2D and then 110% for 3D geometry.
can this be just the effect of changing the geometry or there is something else that I have to check ?
Hello Ahmed Jarboui
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.