Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modelling adhesion in solid mechanics
Posted Aug 29, 2017, 2:13 a.m. EDT Structural Mechanics Version 5.2a, Version 5.3 1 Reply
Please login with a confirmed email address before reporting spam
Do any one have a worked out example for adhesion between two surfaces in contact? Please share
Thanks and Regards
Sreeram R
Thanks and Regards
Sreeram R
1 Reply Last Post Aug 29, 2017, 10:53 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
7 years ago
Updated:
7 years ago
Hello Sreeram,
Adhesion and decohesion are features that were added to the Structural Mechanics Module at version 5.2a. We wrote a blog post at the time that should provide you with a helpful introduction to the topic:
www.comsol.com/blogs/how-to-model-adhesion-and-decohesion-in-comsol-multiphysics/
A model featuring adhesion and decohesion is available from the Application Gallery section of our website: www.comsol.com/model/adhesion-and-decohesion-of-indenting-ball-42421
Best,
Jeff
Adhesion and decohesion are features that were added to the Structural Mechanics Module at version 5.2a. We wrote a blog post at the time that should provide you with a helpful introduction to the topic:
www.comsol.com/blogs/how-to-model-adhesion-and-decohesion-in-comsol-multiphysics/
A model featuring adhesion and decohesion is available from the Application Gallery section of our website: www.comsol.com/model/adhesion-and-decohesion-of-indenting-ball-42421
Best,
Jeff