Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Get Initial Value

Posted Mar 14, 2011, 11:13 a.m. EDT Studies & Solvers Version 4.1 1 Reply

Leon Kamp
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In COMSOL 3.5 there was an option (in the solve menu): Get Initial Value. I wonder whether this option is still available in 4.1. I cannot find it.

Leon
1 Reply Last Post Mar 15, 2011, 4:34 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 15, 2011, 4:34 a.m. EDT
Hi

it's there: select in the solver node the Dependent Variables, right click, and do a Compute to Selected"

This is the V4 way to load the initial values

--
Good luck
Ivar
Hi it's there: select in the solver node the Dependent Variables, right click, and do a Compute to Selected" This is the V4 way to load the initial values -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content