Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

fluid-structure interaction

Posted Mar 17, 2011, 12:58 p.m. EDT Structural Mechanics Version 4.2 2 Replies

Hongxue Cai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Does anyone know if Comsol can do frequency domian analysis In fluid-structure interaction?

It seems when I do a statioanry analysis, I get sth, but when I set the study step to "frequency domain", everything is zero in my solution.

Thank you in advance!
2 Replies Last Post Jul 8, 2011, 10:42 a.m. EDT
COMSOL Moderator

Hello Hongxue Cai

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

David Torello
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 7, 2011, 4:40 p.m. EDT
I was wondering the same thing. I think you just have to do a transient analysis and then take FFT's to get to the frequency domain. MATLAB will help you with this.

Cheers.
I was wondering the same thing. I think you just have to do a transient analysis and then take FFT's to get to the frequency domain. MATLAB will help you with this. Cheers.
John
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 8, 2011, 10:42 a.m. EDT
This is a good question. I find the same issue coming up in version 4.2, only getting NaN instead of a solution.
This is a good question. I find the same issue coming up in version 4.2, only getting NaN instead of a solution.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content