Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frames in Solid Mechanics

Posted Mar 18, 2011, 12:53 p.m. EDT 2 Replies

Tushar Gulati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

It seems the default frame in the Solid Mechanics module is "Deformed Frame". How should I switch this to the Material or Reference Frame?? In 3.5a it was just a click but I did not find this option V4.1

I have also attached the file as well

Please help!!

Thanks
Tushar

Attachments:

2 Replies Last Post Mar 18, 2011, 1:09 p.m. EDT
Xiaogai Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 18, 2011, 1:03 p.m. EDT
Hi,

In Comsol 3.5a, the deformed frame is turned off by default.
If you open your 3.5a model in 4.1, you will see that there is an option (maybe under "Advanced" options) under solid mechanics module "Displacements control the spatial frame", this option is UNCHECKED.

But if you construct a model in 4.1 for solid mechanics module, it's CHECKED by defaut. it's somewhere mentioned in the manual.

So if you don't want the deformed frame, I think you can just uncheck the option "Displacements control the spatial frame".
Hope this helps.

XLi
Hi, In Comsol 3.5a, the deformed frame is turned off by default. If you open your 3.5a model in 4.1, you will see that there is an option (maybe under "Advanced" options) under solid mechanics module "Displacements control the spatial frame", this option is UNCHECKED. But if you construct a model in 4.1 for solid mechanics module, it's CHECKED by defaut. it's somewhere mentioned in the manual. So if you don't want the deformed frame, I think you can just uncheck the option "Displacements control the spatial frame". Hope this helps. XLi
Tushar Gulati
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 18, 2011, 1:09 p.m. EDT
Hi Li

Thanks!! It does :)

Best
Tushar
Hi Li Thanks!! It does :) Best Tushar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content