Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Diffusion of liquid to solid

Please login with a confirmed email address before reporting spam

Hi

Does anybody can help me about modeling of Diffusion fro mliquid to solid. I am beginner and I want to know about this and really need help


1 Reply Last Post Oct 27, 2017, 8:40 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Oct 27, 2017, 8:40 a.m. EDT

Hi

You can use the transport of diluted species module, there you can specify the diffusion coefficient of your material (and convection if there is any) and also add you boundary conditions depending on the fluid you have. Basically you have to set the concentration on each boundary. For example if you have water, the boundary conditions will be the concentration of the saturated pressure.

Good luck

Hi You can use the transport of diluted species module, there you can specify the diffusion coefficient of your material (and convection if there is any) and also add you boundary conditions depending on the fluid you have. Basically you have to set the concentration on each boundary. For example if you have water, the boundary conditions will be the concentration of the saturated pressure. Good luck

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.