Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pair thermal contact

Posted Oct 27, 2017, 12:43 p.m. EDT Interfacing, Heat Transfer & Phase Change Version 5.2a 0 Replies

Zahra Kanani Aghkand
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to use pair thermal contact in my simulation ( two polymeric film that press toghether under the defined temperature). actually I get good results that have good agreement with experimental reasults at first run but when I chanegd the parameters ( Q, hg , hc, r) some times there is no difference or some times there is a error and can not be solved.If any one have an idea or information on these parameters Please help me.

Thank you in advance, Zahra

0 Replies Last Post Oct 27, 2017, 12:43 p.m. EDT
COMSOL Moderator

Hello Zahra Kanani Aghkand

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content