Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Creating an AC current (Frequency Domain)

Posted Dec 7, 2017, 3:11 p.m. EST Low-Frequency Electromagnetics, RF & Microwave Engineering Version 5.2a 1 Reply

Omeed
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello!

Im currently trying to create an ac current in frequency domain and I am having trouble.

What im trying to do is something very simple. Have a block that is made up of copper and flow an ac current through this box through 1 axis (lets say x direction)

Any help would be much appreciated! Thank you

1 Reply Last Post Dec 8, 2017, 1:21 p.m. EST
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Dec 8, 2017, 1:21 p.m. EST
Updated: 7 years ago Dec 8, 2017, 1:21 p.m. EST

Hi Jason,

For modeling coils, please refer to this blog post and associated examples mentioned in this blog. https://www.comsol.com/blogs/modeling-coils-in-the-acdc-module/

BR/Nirmal

Hi Jason, For modeling coils, please refer to this blog post and associated examples mentioned in this blog. https://www.comsol.com/blogs/modeling-coils-in-the-acdc-module/ BR/Nirmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content