Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Unable to Mesh Certain Domains due to "Unsupported Topology at Vertex"
Posted Jan 8, 2018, 4:20 p.m. EST Bioengineering, Geometry, Mesh 0 Replies
Please login with a confirmed email address before reporting spam
Hey all,
I've been trying to mesh my model for a while now, and haven't been able to do it.
My model consists of a nerve with a stimulating cuff electrode around it, and everything is surrounded by saline. Due to the small size of the nerve, I've been using swept meshes.
The first issue I ran into was that the saline can not be meshed using a sweep since it is not a uniform shape the whole way through.
I've seen that you can combine a free tetrahedral mesh and a swept mesh somehow by meshing the surfaces individually, but I wasn't able to figure that out. Any help there would be appreciated.
To try and circumvent this issue, I partioned the saline into shorter segments that could each be swept individually, but now I'm getting a new error: "Failed to create swept mesh for domain. Unsupported topology at vertex." The point where this is happening is where two of the partioned saline domains meet along with a 3rd domain. I'm not sure what's causing it.
I'm really not sure where to go from here. Any help would be appreciated.
Thanks in advance!
Attachments:
Hello Jesse Bucksot
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.