Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Condition Solid-Liquid Interface

Posted Feb 15, 2018, 5:14 p.m. EST 0 Replies

Danilo Borges
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am stuck in a simple problem. It is 2D problem about heat exchange between solid-liquid. Initially I have a square box (1m x 1m) contains 280K water. Inside the box I have a 400k iron block (0.1m x 0.1m). The problem is I dont know which boundary condiction in solid liquid interface I must use in order to study the convection in the liquid and the temperature rate in the iron.

0 Replies Last Post Feb 15, 2018, 5:14 p.m. EST
COMSOL Moderator

Hello Danilo Borges

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content