Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
regarding change of frequency and ploting graph in square spiral inductor
Posted Apr 9, 2011, 8:54 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
sir,
i have created square spiral inductor
please tell me how to plot graphs at variable frequency
and also determining the value of inductance and q factor with the help of graph
i have created square spiral inductor
please tell me how to plot graphs at variable frequency
and also determining the value of inductance and q factor with the help of graph
1 Reply Last Post Apr 10, 2011, 5:35 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
pls use the tabs to specify the version and the physics you use, as the replies will vary
for v4, you plot easiest via a "Definition Probe ..." or a "Results Derived Value ....
For a frequency domain solver you will have a scan over the frequency values (if you select a range) and then you can generate a plot by hitting the icon on the upper Table GUI border.
Be sure you have defined a GND boundary on one side of your inductor, and a voltage source of something <>0 on the other side, or used a lumped port/terminal
--
Good luck
Ivar
pls use the tabs to specify the version and the physics you use, as the replies will vary
for v4, you plot easiest via a "Definition Probe ..." or a "Results Derived Value ....
For a frequency domain solver you will have a scan over the frequency values (if you select a range) and then you can generate a plot by hitting the icon on the upper Table GUI border.
Be sure you have defined a GND boundary on one side of your inductor, and a voltage source of something <>0 on the other side, or used a lumped port/terminal
--
Good luck
Ivar