Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

coupling fluid flow with acoustics

Posted Apr 19, 2011, 3:11 p.m. EDT Fluid & Heat, Acoustics & Vibrations Version 3.5a 3 Replies

Sylvana Garcia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, everyone

I would like to know what velocities of a fluid are produced by the vibration of a probe submerged in it. I have already done transient acoustic modeling, where the pressure distributions are found within the fluid. One of the probe boundaries was defined as normal acceleration. However, I am interested in the velocity fields of the fluid. Is it possible to take the pressure as an input for the fluid flow? How can I achieve this? Any ideas?

Thank you
Sylvana
3 Replies Last Post May 11, 2015, 2:35 p.m. EDT
COMSOL Moderator

Hello Sylvana Garcia

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Richard O'Rorke
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 31, 2011, 12:05 p.m. EDT
Hi Sylvana,

I am trying to model a similar system and have used the transient acoustic modelling in the liquid. Did you manage to couple this to a fluid flow?

Thanks,

Richard
Hi Sylvana, I am trying to model a similar system and have used the transient acoustic modelling in the liquid. Did you manage to couple this to a fluid flow? Thanks, Richard
Sylvana Garcia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 13, 2011, 10:55 p.m. EST
Hi, Richard

I have left this problem on standby for now, but plan on continuing this model soon. If I'm successful, I'll send you a note.

Sylvana
Hi, Richard I have left this problem on standby for now, but plan on continuing this model soon. If I'm successful, I'll send you a note. Sylvana
Handy Kidd
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago May 11, 2015, 2:35 p.m. EDT
Hi!
Have you solved it?I hava the same problem
Hi! Have you solved it?I hava the same problem

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content