Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modelling a pneumatic joint using the Multibody dynamics module
Posted Mar 29, 2018, 6:42 a.m. EDT Structural & Acoustics, Structural Mechanics Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
Hi everyone, I am trying to simulate a pneumatic joint using the multibody dynamics module in comsol. This joint is part of a suspension system that I am working on. I am not sure if there's a specific way to simulate such joints. What I have done so far is to define a prismatic joint and then apply a "Spring Foundation" module on the surface of the edge of the joint.
The study runs, but I'm not sure the results are correct.
So my question is, how would you go about modelling a pneumatic joint in Comsol?
Many thanks, Andreas
Hello Andreas Malekos
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.